IP65 LED Garden light 80w garden lighting Park garden lamp

Short Description:

Lamp Luminous Efficiency(lm/w): 80

Power: 30W/40W/50W/60W/80W/120W/150W

Color Rendering Index(Ra): 70

Support Dimmer: Yes

Input Voltage(V): AC 85-265V

CRI (Ra>): 70

Send email to us

Product Detail

Product Tags

SLT07 Series LED Garden light

T07 assembly instructions

Remove the stainless steel presser from the support bar

Attach the two support rods to the circular joint (M6*20MM)

Install the support rod assembly installed in the previous step on the circular lamp

The finished effect is shown in the picture above

Hold the wire with a stainless steel sheet

Cover the middle joint with a circular cover

Electrical Characteristics

Input Voltage: AC100-240V

50/60Hz PF: >0.9

Power Efficiency: ≧0.90

Features

• IP66 waterproof/dust proof/explosion proof/IK09.

• Aluminum shape good at heat dissipation.

It can also be installed vertically

• Philips SMD 3030 Ra>70/SDCM<6

• 100,000 times switching cycle before failure

• Total harmonic distortion(THD)<10%

• Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage

• Pass 3G vibration test

Application

Garden light

It is mainly applied to branch road, factory, school, garden, various residential communities and courtyards. The installation height is 4-8m and the installation torque is 16Nm.

Product Dimension

Model NO.	Size L(mm)	Size W(mm)	Size H(mm)	Support pole diameter
T07	450	450	523.5	76/60

Parameter

Model NO.	Power(W)	Light Source	LED QTY (PCS)	Lens(PCS)	CCT(K)	Lumen(km/h)	CRI
T07-30W	30	3030	64	4	4000k	130	＞70
T07-40W	40	3030	64	4	4000k	130	＞70
T07-50W	50	3030	64/96	4/6	4000k	120/135	＞70
T07-60W	60	5050	96	6	4000k	130	＞70
T07-80W	80	3030	108	9	4000k	130	＞70
T07-100W	100	3030	144	9	4000k	130	＞70
T07-120W	120	3030	144	9	4000k	130	＞70
T07-150W	150	3030	216	9	4000k	130	＞70

Erp Technical Specification

Item	Symbol	specification/Data
Color Index	CRI	Ra>70
Luminous Efficacy	lm/W	120--140 lm/W
Energy efficiency Class	/	A++
Color consistency in level	/	Max.6SDCM
THD	/	<15%
Starting Time	S	<0.5S
Switching cycle before failure	/	>100,000times
Premature failure rate@1000h	/	0
Lifespan	H	>50000Hrs

Installation way

Installing steps

Turn off the power before installing.

Make sure the model, rated voltage and wattage are the same with the design parameters.

Check the wire specification, Connect the wire, Through the waterproof connector, connect the L/N wire of the street lamp to L/N wire of the city electricity.

1. Put the light into the light stem.

2. Fix the screw of handle.

3. Check the installing of the light whether level or not .

4. Adjust the angle into which needed

5. Check the the handle screw fixed or not, if loose, should make it tightly, torque is 16NM